Wieland ecoline

Lead-free solutions for a sustainable Future

Products

Semi-finished products and tube systems made of copper and copper alloys

Wieland Moellersdorf Ges.m.b.H.

Wieland Moellersdorf Ges.m.b.H. was founded in 1870, acquired by Wieland in 1998 and is Austria's leading service centre for copper tubes, joining technology and semi-finished products made of copper and copper alloys. The company's own fleet of vehicles is used to supply partners from wholesale, industry and refrigeration/air conditioning.

Own transportation fleet
Delivery reliability

Organization

Extruded Products

Wieland Moellersdorf Ges.m.b.H. Lützowgasse 12-14
1140 Wien
Austria (UTC+1)

+43 1910 860
F +43 1910 8666
Send email

Business hours

Monday - Tuesday
7:30 am - 12:00 pm
12:30 pm - 4:30 pm
Wednesday - Thursday
7:30 am - 12:00 pm
12:30 pm - 4:00 pm
Friday
7:30 am - 1:00 pm

Goods acceptance times

Monday - Thursday
7:30 am - 12:00 pm
12:30 pm - 4:00 pm
Friday
7:30 am - 12:00 pm

Plan route

Facts

1870

Gründung

1500

to Absatz pro Jahr

3500

Artikel

3000

m² Lagerfläche

Mitarbeiter

Metal Information

Current metal prices

Officials (Prompt)

30.10.2023

Cu (Settlement)

8,110.00 USD/to

Zn (Settlement)

2,463.50 USD/to

EUR (Bid)

1.05740 USD

All details and charts

Products

Our products at a glance

Product categories

Headline

Back to product overview

Complete program

Fittings, Solder and Skirting boards

Rods

Sectional rod

Machining

WICONNEC^®

ecoline^®: Lead-free solutions

Forging Stock

Sheets and Plates

Smooth industrial tubes

Plumbing tubes

Refrigeration and medical gas tubes

Wire

Materials

Solder fitting
For connoisseurs of the plumbing and heating trade, the Conex | Bänninger >B< is a trademark that has stood for safety, quality and innovative products since 1909.

Fittings made of copper from Conex | Bänniger of the 5000 series: this material is oxygen-free and contains a copper mass fraction of at least 99.90%. It has excellent soft and hard solderability.

Gunmetal fittings from Conex | Bänniger of the 4000 and 3000 series: the gunmetal alloy of the cast fittings fully complies with the requirements of the new EN 1982 and can therefore be used for drinking water in accordance with ÖNORM
B 5014-3. The alloy offers the highest possible protection and has good soft and hard solderability.

CONEX clamping ring connectors
CONEX clamping ring connectors belong to the group of metal-sealing plain pipe connections and consist of fitting body, clamping ring and union nut. The tubes to be connected are pushed through the pre-assembled connection into the fitting body as far as it will go and the union nut is tightened by hand. The union nuts are tightened with commercially available tools or with the CONEX wrench. In the process, the compression ring deforms and forms the metallic sealing connection between the tube and the fitting.

>B< Press Fitting and >B< Press Gas Fitting
With the current >B< Press connection technology made of material copper and gunmetal, we offer another highly economical installation technology. >B< Press Fittings series P4000 and P5000 have been specially developed for the field of plumbing and heating installation and can also be used for many other applications. The >B< Press Fittings range includes over 300 different items in copper and gunmetal materials. The >B< Press Gas Fittings series PG4000 and PG5000 have the quality mark certificate no. G 2.692 for gas.

>B< Oyster
The high quality transition coupling >B< Oyster made of gunmetal allows a quick, clean and economical assembly of all screwed components with internal thread. Application in the fields of drinking water, rainwater, heating, oil-free compressed air and in industry. The cold and energy-independent connection technology is particularly suitable for installation in areas at risk of fire. >B< Oyster are detachable and reusable.

SUPERSAN® soft solders
SUPERSAN® soft solders are solders for joints of tubes and fittings which are produced with a working temperature of less than 450° C. SUPERSAN® soft solders have the ÖVGW quality mark certificate no.: W 1.156 for drinking water. The solders are distinguished as tin-silver soft solders, e.g. SUPERSAN©-220, on yellow hand coil and tin-copper soft solders, e.g. SUPERSAN©-ST2 or -ST3, on blackberry-red hand coil.

SUPERSAN® soft solder flux and paste
SUPERSAN® soft solder fluxes are ideally suited for joints of tubes and solder fittings of the 4000 and 5000 series for a maximum working temperature of 450°C. For example, there is the SUPERSAN©-FLUX 100 soft solder flux and the SUPERSAN©-FIT 4000 soft solder paste and they have the ÖVGW quality mark Certificate No.: W 1.157 for drinking water.

SUPERSAN® Brazing Alloys
SUPERSAN® brazing alloys are brazing alloys for joints of tubes and fittings which are manufactured with working temperatures above 450° C. The brazing alloys are divided into silver brazing alloys, copper-phosphorus brazing alloys and special brass brazing alloys. The brazing alloys are supplied in the form of rods 500 mm long. Silver brazing alloys are available both bare and coated. Our brazing alloys can be distinguished by their shape: silver brazing alloys and special brass brazing alloys have a round shape, while our phosphorus brazing alloys have a square shape.

HZ skirting boards - The original! The most elegant way to make copper tubes invisible. With HZ products, special emphasis is placed on ease of installation. Quick and smooth installation is possible even in difficult installation situations in old buildings.

HZ radiator connections offer the right radiator connection for every tube! The simple and complete HZ radiator connections - whether for soldering, pressing, plugging, clamping or screwing - bring many advantages. They can be used on the right and left side of the radiator and usually no chiselling out is necessary for installation - so time-saving and simple processing is guaranteed.

Materials

Wieland	EN Designation	EN No.	ASTM UNS-No.
K08	Cu-OFE	CW009A	C10100
K12	Cu-HCP	CW021A	C10300
K18/K32	Cu-ETP	CW004A	C11000
K20/K21/K28	Cu-DHP	CW024A	C12200
K30	Cu-OF	CW008A	C10200

Wieland	EN Designation	EN No.	ASTM UNS-No.
K41	CuNi1Pb1P*	-	C19150 / C19160
K52	CuNi2Si	CW111C	C70260
K53	CuNi2SiS*	-	-
K54	CuNi2SiCr*	-	C81540
K60	CuCr1Zr	CW106C	C18150
K61	CuCr1Zr	CW106C	C18200
K65	CuFe2P	CW107C	C19400
K81	CuSn0,15	CW117C	C14415
KC1	CuPb1P	CW113C	C18700
eco KS2^®	CuSP	CW114C	C14700

Wieland	EN Designation	EN No.	ASTM UNS-No.
K55	CuNi3Si1Mg*	-	C70250
K88	CuCrAgFeTiSi*	-	C18080

Wieland	EN Designation	EN No.	ASTM UNS-No.	JIS-No.
Z11	CuZn35Pb1	CW600N	C34000
Z12	CuZn35Pb2	CW601N	C34200 / C34500
Z14	CuZn37Pb2	CW606N	C35300
Z21	CuZn38Pb2	CW608N		C3713
Z23	CuZn36Pb3	CW603N	C36000
Z29	CuZn39Pb2	CW612N	C37700
Z31/Z41/Z48	CuZn40Pb2	CW617N	C38000
Z32/Z33	CuZn39Pb3	CW614N	C38500
Z40	CuZn43Pb2Al	CW624N	-
Z43	CuZn33Pb1AlSiAs	CW725R	-
Z45	CuZn36Pb2As	CW602N	C35330
Z46	CuZn36Pb2As	CW602N	C35330

Wieland	EN Designation	EN No.	ASTM UNS-No.
L10/L13/L15	CuNi10Fe1Mn	CW352H	C70600
L30	CuNi30Mn1Fe	CW354H	C71500

Wieland	EN Designation	EN No.	ASTM UNS-No.	JIS-No.
M10	CuZn10	CW501L	C22000	C2200
M15/M16/M17	CuZn15	CW502L	C23000
M20	CuZn20	CW503L	C24000	C2400
M30/M34	CuZn30	CW505L	C26000	C2600
M36	CuZn36	CW507L	C26800 / C27000	C2700
M37/M38	CuZn37	CW508L	C27200	C2720
eco M41^®	CuZn38As	CW511L	C27453
eco M57^®	CuZn42	CW510L	-
eco M58^®	CuZn42	CW510L	-
eco M59^®	CuZn42	CW510L	-
eco M60^®	CuZn40	CW509L	C27450

Wieland	EN Designation	EN No.	ASTM UNS-No.
S40	CuZn37Mn3Al2PbSi	CW713R	C67420
eco S34^®	CuZn34Mn2SiAlNi*	-	C67340
eco SW1^®	CuZn21Si3P	CW724R	C69300

Wieland	EN Designation	EN No.	ASTM UNS-No.
B06	CuSn6	CW452K	C51900
B09/B10	CuSn8	CW453K	C52100
B12/B21	CuSn8P/CuSn8	CW459K/CW453K	C52100
B44/B45	CuSn4Pb4Zn4	CW456K	C54400
B44/B45	CuSn4Pb4Zn4	CW456K	C54400
BV9	CuSn6	CW452K	C51900

Wieland	EN Designation	EN No.	ASTM UNS-No.
U35	CuAl10Ni5Fe4	CW307G	C63020
U36	CuAl11Fe6Ni6	CW308G	-

Wieland	EN Designation	EN No.	ASTM UNS-No.
N29	CuNi18Zn20	CW409J	-
N31	CuNi7Zn39Pb3Mn2	CW400J	-
N32	CuNi12Zn30Pb1	CW406J	-
N37	CuNi18Zn19Pb1	CW408J	-
N48	CuNi12Zn38Mn5Pb2	CW407J	-
eco N59^®	CuNi9Zn41FeMn*	-	-

Wieland manufactures solid and hollow copper sections in a wide range of sizes. Featuring contours close to the final geometry, these sections help you obtain your finished parts in just a few operations. Together with you, we develop complex sections of copper from the draft to the initial prototypes to series production.

Materials

Copper

Wieland	EN Designation	EN No.	ASTM UNS-No.
K12	Cu-HCP	CW021A	C10300
K16	Cu-ETP1	CW003A	-
K18/K32	Cu-ETP	CW004A	C11000
K20/K21/K28	Cu-DHP	CW024A	C12200
K30	Cu-OF	CW008A	C10200
KA1	CuAg0,10P	CW016A	-

The Wieland WICONNEC brand offers a range of copper materials in the form of rods and wires that are ideal for machined sockets and pins for plug connectors. This material portfolio also offers brass materials in addition to specially developed copper alloys for complex turned plug connectors.

WICONNEC

Wieland ecoline is our answer to enable your future business: the lead-free product line fulfills your individual needs for an efficient production and future oriented product development. And is, of course, compliant with the latest requirements of legislative directives on lead-free materials.

Learn more about
Wieland ecoline

Wieland hot stamping rods

Good forging results can be obtained only when all links in the process chain have been matched to each other to the optimal effect. With Wieland hot stamping rods you are offered a forging stock which comprehensively fulfils these requirements. Your benefits: uniform dark surface for reproducible processing properties, tight diameter tolerances in the drawn size range, and hence precise configuration of the slug weight.

We can offer you a wide range of materials, geometries, and surface qualities to choose from. Many geometries are available from our sheets stores.

Learn more
Copper alloy sheets and plates

Available materials

Wieland	EN	EN-Nr.	UNS
K08	Cu-OFE	CW009A	C10100
K12	Cu-HCP	CW021A	C10300
K20 / K21 / K28	Cu-DHP	CW024A	C12200
K30	Cu-OF	CW008A	C10200
K65	CuFe2P	CW107C	C19400
L10	CuNi10Fe1Mn	CW352H	C70600
L30	CuNi30Mn1Fe	CW354H	C71500

Delivery forms

Level wound coils: 100 kg, 150 kg, 300 kg, 530 kg
Straight lengths
Rings

Materials

K65 - Sustainable and efficient

Sustainable and efficient – two keywords that have had a decisive impact on our time and have gained in relevance in recent years, especially in refrigeration. Increased environmental awareness in society and industry has therefore led to a kind of renaissance of natural refrigerants, especially CO₂. Wieland supports this turnaround with a tube system that meets the high requirements of CO₂ as a refrigerant.

Wieland K65 tubes have been designed for CO₂ applications in the commercial field, especially that of supermarket refrigeration systems. Wieland K65 alloy provides the mechanical strength high enough to withstand the high operating pressures of CO₂. At the same time, K65 tubes have outstanding processing properties, similar to those of standard copper (Cu-DHP/C12200).

All Wieland K65 tubes are available in the soft condition (R300/O61) to ensure excellent bending / flaring and collaring properties.

Wieland K65 tubes are offered from stock in two pressure ranges, 80 bar and 120 bar, and in dimensions ranging from 3/8” up to 2-1/8”.

Moreover, K65 tubes are also available in individual dimensions and different delivery forms.
For industrial processing, in particular CO₂ heat exchanger (evaporator / gas cooler) manufacturing, level wound coils (LWC) are offered.

More K65 products in other categories

Your benefits

Pressure resistance tailormade to your needs
Cost reduction through weight reduction
Proven processing technology: brazing instead of welding!
Excellent heat transfer
Design according to EN 14276 - TUEV or UL certification on demand

Typical applications

Components of R744 refrigeration systems
Fin coil heat exchangers for higher operation pressures (e.g. R744 evaporators or gas coolers )
Shell and tube heat exchangers for higher operation pressures (e.g. R744 evaporators or gas coolers)

Technical properties

Material: K65
Conditions: soft R300/O61 and hard R420/H80
Delivery form: Level wound coils or straight lengths
Coil weights: 100 kg, 150 kg, 300 kg
Available dimensions: 5 - 28 mm for LWC; 5 - 110 mm for straight lengths
Usual standards: EN 12735-1 / EN 14276 / ASTM B 1017

Further information

cuproclima

For high-quality seamless inside smooth or innergrooved copper tubes in level-wound coils for the refrigeration and air-conditioning industries. The specified quality and inspection criteria exceed the existing requirements of standards (e. g. EN 12735-2, ASTM).

Your benefits

longer run time for machines when uncoiling tubes
reduced scrap for finished products
reduced set-up time
detection of even smaller surface defects on the tubes
possible malfunctions of finished equipment during pressure testing are reduced
fewer impurities in the refrigerant circuit.

Fields of application

air-cooled heat exchangers for the air-conditioning and refrigeration industry
evaporators
condensers
heat exchangers
air coolers

Technical Properties

Materials Cu-DHP
Conditions soft and extra soft
Delivery form level wound coils only
Coil weights 100 kg, 150 kg, 300 kg
Available dimensions 4 - 28 mm, wall thicknesses on request

Copper tubes with ultra clean inner surface for industrial applications

Our innovative production process for cuproclean tubes removes carbon film. This results in higher reliability, longer life and reduced maintenance costs.It is suitable for all fresh water applications. Copper offers outstanding versatility and is characterized by excellent formability as well as good processing properties. cuproclean copper tubes are also available in combination with other qualities such as cuproform.

Your benefits

ultra-clean tube surface free from carbon film
highest reliability and longer life also in fresh water applications
best corrosion resistance
carbon film test according to EN 1057 and confirmation in the certificate

Fields of application

cooling ceilings
solar water heating systems
heat generators

Technical properties

Materials Cu-DHP
Conditions Soft
Delivery form Level wound coils
Coil weights 100 kg, 150 kg, 300 kg
Available dimensions 6 - 28 mm, wall thicknesses on request

High formable copper tubes

In boiler manufacture, for example the tubes may be formed by: expanding, bending, upsetting and beading. Industrial copper tubes from conventional production do not always meet these high demands. Therefore, it is often necessary to use additional fittings made from other materials. This results in further production steps and consequently higher production costs.

Your benefits

no special fittings necessary; this results in lower costs of production
higher added value in your production
exceptional forming properties – 80% expansion of the tube end tested and certified on the inspection certificate
less scrap with very high deformation

Fields of application

Connecting pieces, e.g. especially for boilers

Technical properties

Materials Cu-DHP
Conditions soft and extra soft
Delivery form Layer-wound coils and straight lengths
Coil weights 100 kg, 150 kg, 300 kg, 530 kg
Available dimensions 6 - 28 mm for LWC; 6 - 64 mm for straight lengths

Copper tubes with high-purity outer surface for solar thermal applications

In the process of manufacturing solar heat absorbers requirements vary depending on the application. In the solarclean family you will find the most suitable copper tube quality for your optimized fabrication.

solarclean classic
The particularly clean tube surface ensures a high quality weld. You can therefore save at least one cleaning operation or an extensive pre-treatment of the components to be welded.

solarclean HP
For heat pipes in vacuum tube collectors - highest surface cleanliness on tube outside and inside prevents contamination of the heat transfer medium in the heat pipe and yet ensures the efficiency of the system.

solarclean plus
Improved forming properties for the fabrication of meander-shaped absorber tubes facilitate the setting of the bending machines and increase process reliability. solarclean_plus ensures super clean tube surfaces substantially improving the ultrasonic welding process.

solarclean eco
The cost-effective alternative for laser welding of absorber plate and tubing with sufficient cleanliness.

solarclean SL
Like solarclean classic, solarclean SL ensures superclean tube surfaces. Depending on your fabrication needs, you can also order solarclean in straight lengths.

Technical properties

Materials Cu-DHP
Conditions hard, hard relaxed, half-hard
Delivery form Layer-wound coils and straight lengths
Coil weights 100 kg, 150 kg, 300 kg, 530 kg
Available dimensions 6 - 15 mm; wall thicknesses 0.3-1.2 mm

Available materials

Wieland	EN	EN-Nr.	UNS
K20 / K21 / K28	Cu-DHP	CW024A	C12200

Materials

For a more sustainable future in construction.

With its 100 % share of recycled material, the cuprolife copper tube makes a sustainable difference, and thus makes a significant contribution to the advancement of building and construction as well as building services.

Every cuprolife tube from Wieland is manufactured in keeping with the mass balance approach – using a process with 100 % recycled copper. As the starting point when verifying cuprolife, TÜV SÜD tested the procedure for calculating the 100 % recycled content*.

The new standard in copper tubes: cuprolife^®.

Thanks to cutting-edge manufacturing techniques, cuprolife tubes exceed even the highest requirements. Optimal efficiency and reliability are guaranteed along with an exceptional service life. cuprolife tubes are universally usable. cuprolife is permanently in stock and can be supplied in any size from 6 x 1 mm to 159 x 3 mm.

Fields of application

Domestic hot and cold water supply
Heating
Gas
Liquid gas
Heating oil / biofuel oil B10
Solar systems
Rainwater
Industrial compressed air
Sprinkler systems
Firefighting systems

Technical features

100 % recycled copper*
Design according to EN 1057, quality assured
Made of pure copper Cu-DHP
With quality mark and DVGW certification: DV-7204AU2106 (6 to 159 mm outside diameter)
Universal use in a range of finely differentiated dimensions
Optimum availability and compatibility with a wide range of fittings
Maximum operating temperature at 10 bar operating pressure: 250 °C (applies to dimensions up to DN 150)
Fire resistance: EN 13501-1 – A1 (nonflammable)
Dimensions according to DVGW GW 392 (6 to 159 mm) with closed tube ends
For optimal drinking water hygiene

*Mass balance approach, based on ISO 14021, verified by TÜV SÜD.

Learn more

Reliable for all areas of home installation

For many years, installers have been relying on SANCO branded copper tubes. The tubes are very reliable, suitable for all areas of domestic installation and have more than proven their worth in practice. Whether drinking water supply (hot and cold), heating systems, oil, gas and liquid gas supplies as well as thermal solar systems: Wieland SANCO tubes are always the right choice and, of course, covered by the relevant regulations.

Technical features

Patented manufacturing process: SANCO tubes are significantly better than required by standards and regulations.
Design according to EN 1057, quality assured
Made of pure copper Cu-DHP
With quality mark and DVGW certification:
DV-7204AU2106 (12 to 159 mm outside diameter).
Universal use in a range of finely differentiated dimensions
Optimum availability and compatibility with a wide range of fittings
Maximum operating temperature: 250 °C
Fire resistance: EN 13501-1-A1 (non-flammable)
Dimensions according to DVGW GW 392 (12 to 159 mm) with closed tube ends
For optimal drinking water hygiene
Wide range of certifications available, such as Kitemark, Afnor, KIWA, DVGW and many others

Fields of application

Domestic hot and cold water supply
Heating systems
Gas and oil services for heating and cooking
Solar systems
Rainwater
Industrial compressed air
Sprinkler and Fire-fighting-systems
Further applications in consultation with our technical advisory service

WICU

WICU tubes a have a mill-applied protective coating. They are therefore suitable for concealed installation under plaster or in environments with an aggressive atmosphere, and for installation outdoors, either above or below ground.

Technical features

Design according to EN 1057, quality assured
Made of pure copper Cu-DHP
With quality mark and DVGW certification:
DV-7204AU2106 (12 to 42 mm outside diameter).
Protective coating conforms to EN 13349 and DIN 30672-1 class B
Reduction of condensation
Fire resistance: EN 13501-1-E
Color of coating: light gray
Temperature range up to 100 °C

Fields of application

Domestic hot and cold water supply
Heating systems
Gas and oil services for heating and cooking
Rainwater
Industrial compressed air
Further applications in consultation with our technical advisory service

cuprotherm CTX

cuprotherm CTX tubes are copper tubes with a firmly adhering coating. Due to their structure, they are very easy to process and are characterized by a flexibility so far unknown for metal tubes. CTX tubes are a technically high-quality and at the same time economically interesing solution: They offer an attractive price per meter for copper tubes at stable conditions, and are therefore also convincing in terms of reliability in planning.

Technical features

Flexible copper tube made of pure copper Cu-DHP
Temper: soft R220 according to EN 1057 with firmly adhering coating made of PE-RT
Fire behavior EN 13501-1, class E
Color of the coating: white, similar to RAL 9010 (pure white)
Temperature application range: up to 100 °C

Fields of application

Heating
Cooling
Radiator connection
Rainwater harvesting systems
Ground collectors (water/glycol)
Concrete core activation

The cuproGas® tubes are pre-coated copper tubes for use in customer natural gas and liquid gas systems. The cuproGas® tubes and the WICU® copper tubes 22mm comply with the requirements of ÖVGW guideline G K21 for customer natural gas systems and guideline F G21 for liquid gas systems and have ÖVGW quality mark certificate no. G 2.789. Together with >B< -Press Gas Fittings they form a reliable system.

ÖVGW quality mark certificate no. 2.789 for cuproGas pipes + WICU pipes and gas
Price list | cuproGas system

SUPERSAN® copper tubes have been the 1st choice of Austrian installers for decades. In addition to the consistently good quality, the processor appreciates the wide range of applications. Special safety is provided by the protected VACUTEC® inner surface for the R250 condition. SUPERSAN® pipes from Wieland Moellersdorf have the ÖVGW quality mark Certificate No. G 2.783 for gas and No. W 1.041 for drinking water.

Learn more
ÖVGW quality mark certificate no. G 2.783 for SUPERSAN© copper pipes and gas
ÖVGW quality mark certificate no. W 1.041 for SUPERSAN© copper pipes and drinking water

Available materials

Wieland	EN	EN-Nr.	UNS
K20 / K21 / K28	Cu-DHP	CW024A	C12200
K65	CuFE2P	CW107C	C19400

Materials

FRIGOTEC® tubes are seamless drawn copper tubes for use in refrigeration and air conditioning. The inner surface of the tubes has a special degree of cleanliness. The tube ends are already sealed at the factory.

FRIGOTEC® tubes are subject to a constricted carbon residue on the inner tube surface in accordance with EN 12735-1. Due to the range of dimensions from 6 × 1 mm to 108 × 2.5 mm, systems of any size can be realized. The pipes are ideally connected with >B< solder fittings. In addition, the FRIGOTEC tubes in R250 and R290 condition in the dimensions 8 × 1 mm to 64 × 1 mm comply with EN 13348 for medical gases.

The applicable standards and guidelines must be observed during planning, processing and operation.

FRIGOTEC Plus tubes are jacketed copper tubes with high internal cleanliness and closed ends for use in refrigeration and air conditioning. Factory applied PE insulation is 9 mm and provides continuous meter marking.
Material CU-DHP, condition R220.

FRIGOTEC Plus copper tubes are subject to a constricted carbon residue on the inner surface of the tube in accordance with EN 12735-1. The range of dimensions includes 6 × 1 mm to 22 × 1 mm and 1/4" to 7/8". The pipes are ideally connected with >B< solder fittings. The applicable standards and guidelines must be observed during planning, processing and operation. The sheathing complies with fire class E of EN 13501-1 and has a vapor diffusion >7000 μ.

Standards: EN 12735-1 | ASTM B280

Learn more
Refrigeration and air conditioning Piping systems

cuprogeo – geothermal energy

The seamless drawn cuprogeo tube is used for geothermal energy production. cuprogeo is designed for the use of refrigerants and gases for direct evaporation in heat pumps. The advantage of this application is that high performance can be achieved with suitable heat pumps.

Your benefits

clean and dry inner surface
supplier traceability through signature
tube protected by an outside surface coating
standard tube quality according to EN 12735-1
requirements comply with the Pressure Equipment Directive 2014/68/EU

Fields of application

geothermal energy
refrigeration equipment and heat exchangers
geothermal heat pumps with direct evaporation

K65 - Sustainable and efficient

two keywords that have had a decisive impact on our time and have gained in relevance in recent years, especially in refrigeration. Increased environmental awareness in society and industry has therefore led to a kind of renaissance of natural refrigerants, especially CO2. Wieland supports this turnaround with a tube system that meets the high requirements of CO2 as a refrigerant.

Wieland K65 tubes have been designed for CO2 applications in the commercial field, especially that of supermarket refrigeration systems. Wieland K65 alloy provides the mechanical strength high enough to withstand the high operating pressures of CO2. At the same time, K65 tubes have outstanding processing properties, similar to those of standard copper (Cu-DHP/C12200).
Wieland K65 tubes are offered from stock in two pressure ranges, 80 bar and 120 bar, and in dimensions ranging from 3/8” up to 2-1/8”.

All Wieland K65 tubes are available in the soft condition (R300/O61) to ensure excellent bending / flaring and collaring properties.

Other dimensions and delivery forms such as level wound coils are offered for industrial processing, in particular manufacturing of CO2 heat exchangers (evaporator/gas cooler).

More K65 products in other categories

Your benefits

Cost reduction through weight reduction
Proven processing technology: brazing instead of welding!
Economical and safe installation of regrigeration systems with up to 120 bar operation pressure
Excellent heat transfer
Design according to EN 14276

Typical applications

Pipelines for refrigeration systems, in particular for CO2 refrigerant, with an operation pressure of up to 120 bar

Technical properties

Material: K65
Operation pressure: 80 bar and 120 bar
Condition: soft R300/O61
Delivery form: straight lengths of 5 m
Available dimensions: 9,52 - 53,97 mm (3/8" - 2-1/8")
Tube ends: closed
Usual standards: EN 14276 / EN 12735-1

Further information

Wieland can offer you wire and sectional made of a wide range of materials: wrought copper alloys and alloys extending from brass, both with and without lead, to bronze, to German silver. And in combination with material properties, sizes, and geometries, our delivery portfolio can meet virtually every requirement. Simply contact us!

Resources

Information material and important documents for download

All Brochures Certificates Price lists Stock program Terms and conditions

Brochures Kälte-und-Klimatechnik.pdf

8.08 MiB

Download

Certificates Recht-zur-Führung-ÖVGW-Qualitätsmarke-Gas.pdf

194.67 KiB

Download

Certificates Recht-zur-Führung-ÖVGW-Qualitätsmarke-Gas.pdf

186.46 KiB

Download

Certificates Recht-zur-Führung-ÖVGW-Qualitätsmarke-Gas.pdf

156.93 KiB

Download

Certificates ZertifizierungÖQAAustria_HalbzeugprodukteausKupferKupferknetlegierungen.pdf

171.8 KiB

Download

Certificates Qualitätsmanagement-TÜV-für-nahtlose-Rohre-und-Stangen-aus-Kupfer-und-Kupferlegierungen_DE.pdf

158.73 KiB

Download

Certificates Anlage-zu-Qualitätsmanagementsystem-für-nahtlose-Rohre-und-Stangen-aus-Kupfer-und-Kupferlegierungen_DE_EN.pdf

357.53 KiB

Download

Certificates ISO-9001-Qualitätsmanagementsystem_DE.pdf

449.09 KiB

Download

Certificates Quality-Austria-Environmental-System-ISO-14001-2018.pdf

422.27 KiB

Download

Certificates Quality-Austria-Energiemanagement-ISO-50001-2018.pdf

434.59 KiB

Download

Certificates ISO-45001-Arbeits-Gesundheits-und-Sicherheits-Managementsystem.pdf

435.47 KiB

Download

Certificates Qualitätsmarke-ÖVGW-Zertifikat-Nr.W-1.041-für-SUPERSAN-Kupferrohre-und-Trinkwasser.pdf

565.13 KiB

Download

Certificates Zertifikat-ÖVGW-Nr.W-1.157-für-Weichlötflussmittel-und-paste-und-Trinkwasser.pdf

212.02 KiB

Download

Certificates Qualitätsmarke-ÖVGW-Zertifikat-Nr.W-1.156-für-SUPERSAN-Weichlote-und-Trinkwasser.pdf

190.83 KiB

Download

Certificates ISO-9100-Qualitäty-management-system-EN.pdf

486.12 KiB

Download

Price lists Preisliste-2023-Weichlote-Flussmittel-Zubehör.pdf

1.12 MiB

Download

Price lists Preisliste-2023-Cuprogas-Zubehör.pdf

2.14 MiB

Download

Price lists Preisliste-2023-B-Pressfitting.pdf

2.44 MiB

Download

Price lists Preisliste-2023-Klemmringverschraubungen.pdf

1020.57 KiB

Download

Price lists Preisliste-2023-B-Oyster.pdf

1.06 MiB

Download

Price lists Preisliste-2023-Löt-Schraubfitting-Zubehör.pdf

1.93 MiB

Download

Stock program Kupfer-Messingstangen-Lagerprogramm.pdf

4.74 MiB

Download

Terms and conditions Allgemeine-Einkaufsbedingungen.pdf

421.47 KiB

Download

Terms and conditions General-Terms-and-Conditions-of-Purchase.pdf

48.67 KiB

Download

Terms and conditions General-Terms-and-Conditions-of-Delivery.pdf

61.08 KiB

Download

Terms and conditions Allgemeine-Lieferbedingungen.pdf

67.91 KiB

Download

Terms and conditions AEB_wieland_moellersdorf_EN.pdf

44.59 KiB

Download

Contact person

Get in touch - Your contact person at Wieland Moellersdorf

Foto Ing. Simon Prodinger Ing. Simon Prodinger
Head of Sales
Wieland Moellersdorf
+43 1 910 86 20
Send email

Foto Helmut Müller Helmut Müller
Purchasing Management & Logistics
Wieland Moellersdorf
+43 1 910 86 23
Send email

Foto Helmuth Raab Helmuth Raab
Sales / Technics SHK
Wieland Moellersdorf
+43 1 910 86 51
Send email

Foto Sibylla Steindl-Tutic Sibylla Steindl-Tutic
Sales SHK
Wieland Moellersdorf
+43 1 910 86 19
Send email

Foto Gerhard Weitlaner Gerhard Weitlaner
Sales AD SHK
Wieland Moellersdorf
+43 1 910 86 0
Send email

Foto Ing. Günther Bernreitner Ing. Günther Bernreitner
Application technology
Wieland Moellersdorf
+43 1 910 86 21
Send email

Foto Peter Blessky Peter Blessky
Sales semi-finished products
Wieland Moellersdorf
+43 1 910 86 42
Send email

Foto Sandra Ammer Sandra Ammer
Sales semi-finished products
Wieland Moellersdorf
+43 1 910 86 52
Send email

Foto Oswald Buxbaum Oswald Buxbaum
Managing Director
Wieland Moellersdorf
+43 1 910 86 13
Send email

Foto Prok. Jutta Pawlik MBA Prok. Jutta Pawlik MBA
Finances | HR Management
Wieland Moellersdorf
+43 1 910 86 12
Send email

Legal information

Wieland Moellersdorf Ges.m.b.H.
Lützowgasse 12–14
1140 Vienna
Austria

+43 1 910 86 0
+43 1 910 86 77
moellersdorf@wieland.com

Managing Director
Oswald Buxbaum

Registered Office: Wien
Court of Registration: Wien FN117884 i
Data processing register: 0427462
VAT Identification Number: ATU 36896800

Career

Start your career at Wieland Moellersdorf

Unleash potential.

Your career at Wieland Find your challenge

Welcome to Wieland. I am your virtual assistant.

Do you need help finding information?

Already know your search term? Then go ahead and use our full text search. You will get a list of all relevant results.

Wieland Moellersdorf Ges.m.b.H.

Organization

Facts

Metal Information

Products

Our products at a glance

Product categories

Headline

Materials

Materials

Materials

Materials

K65 - Sustainable and efficient

More K65 products in other categories

Your benefits

Typical applications

Technical properties

Further information

cuproclima

Your benefits

Fields of application

Technical Properties

Copper tubes with ultra clean inner surface for industrial applications

Your benefits

Fields of application

Technical properties

High formable copper tubes

Your benefits

Fields of application

Technical properties

Copper tubes with high-purity outer surface for solar thermal applications

Technical properties

Available materials

Materials

For a more sustainable future in construction.

The new standard in copper tubes: cuprolife®.

Fields of application

Technical features

Reliable for all areas of home installation

Technical features

Fields of application

WICU

Technical features

Fields of application

cuprotherm CTX

Technical features

Fields of application

Available materials

Materials

cuprogeo – geothermal energy

Your benefits

Fields of application

K65 - Sustainable and efficient

More K65 products in other categories

Your benefits

Typical applications

Technical properties

Further information

Resources

Information material and important documents for download

Contact person

Get in touch - Your contact person at Wieland Moellersdorf

Career

Start your career at Wieland Moellersdorf

Contact

The new standard in copper tubes: cuprolife^®.